Tos Znojmo MRT-RT 100, Инструкция по эксплуатации

Страница: 7 / 19

5
Material applied:
• gearboxes of MRT-RT gear units of sizes 28 to 80 DIN 1725-26-AlSi9Cu3
• gearboxes of MRT-RT gear units of sizes 100 to 180
cast iron GG 20 ČSN 422420
• feet and flanges of MRT-RT of sizes 28 to 120 aluminium
DIN 1725-26-AlSi9Cu3
• feet and flanges of MRT-RT of sizes 150 to 180
cast iron GG 20 ČSN 422420
• worm – steel DIN 1.1731-16MnCr5 (ČSN 414220)
• worm wheel – CuSn12Ni DIN 1705
• bearings – SKF or equivalent
• input shaft – MRT type – dimensions according to IEC 72
• output shaft – with one or two full shafts (separate as accessories)
ČSN 411600, dimensions according to IEC 72, female threaded full shaft
according to DIN 332 DS type
• flanges dimensions – MRT type – for el. motor installation according
to IEC 72 – see the Table 2.1
• lubrication – synthetic oil
• surface finish – MRT-RT, no finish with sizes 28 to 80, varnishing
if required, polyurethane coat with MRT-RT of sizes 100 to 180
Table 2.1 (9.1 catalogue)
Flanges dimensions according to IEC 72