LDR1 & LDR6 Operating Manual – Rev 1
Tortuga Audio
Page: 3
LDR1 accommodate a single unbalanced RCA input. All inputs share a common
audio ground. The audio ground is electrically isolated from the power supply
ground.
Outputs:
The LDR6 has a single unbalanced RCA output. The LDR1 has dual
unbalanced RCA outputs.
Encoder & Remote:
The LDRx is fully controllable via the black knurled rotary
encoder/pushbutton knob located on the right hand side of the front panel. The
same control functions are also available via the Remote.
Unless explicitly stated, the Encoder and Remote have the same functionality. The
Remote is clearly labeled and is far more intuitive to use than the Encoder.
However, for normal volume control, the Encoder operates just like any other
volume control knob (turning it clockwise increases volume, counter clockwise
decreases volume).
The LDR1 uses the same remote as the LDR6 even though some of its buttons are
irrelevant to the LDR1 such as the Input select buttons.
Front Panel:
LDRx:
The LDRx Front Panel has a single multi-function black/knurled Encoder Knob
on the right hand side and a circular Infrared Lens cover on the left hand side.
There is also a blue Status LED (light) to the immediate left of the Encoder Knob.
See
Encoder Switch, Encoder
and
Status LED
below for operational details.
LDR6 Only:
The LDR6 has 6 additional blue Input LEDs (lights) located between the
Status LED and the Infrared Lens. The Input LEDs are labeled and indicate which
Input is currently selected.
Rear Panel:
LDRx:
The LDRx rear panel has a 12 VDC power supply input jack, and a 12 VDC
Trigger Output jack.
LDR6 Only:
The LDR6 rear panel has 7 pairs of single ended line stage RCA jacks.
