Torrot KidsE10, Руководство пользователя, Страница: 15 / 32

15
KIDS
10-20 mm
1
2
3
User Manual
MAINTENANCE
CHAIN TENSION EXAM
The lifespan of the chain depends on its correct lubrication and adjustment. A bad
maintenance can cause a premature wear or damages to the chain and to the
rear/front sprockets.
Before doing the maintenance to the chain, turn OFF the ON/OFF switch and put
the sidestand.
Check the movement up and down in the centre of the lower part of the chain as
is showed in the image . The tension must allow a vertical movement from 10
to 20mm.
Turn the wheel slightly and check the chain movement in different points,
measuring always the gap in the same place.
Examine the teeth in the front and rear sprocket to see if they are wore away or
damaged.
ADJUST YOU MOTORCYCLE CHAIN TENSION
If the vertical movement of the chain is not inside the recommended values,
adjust the tension as indicated below:
- With a 19 mm wrench unbolt the rear axle .
- Turn the eccentrics of both sides by pushing the wheel backwards to stretch
the chain and push it frontwards to do the opposite.
- Screw the axle again ensuring that the chain and the front and rear sprockets
are aligned. Check the movement of the chain again.
1
2
3