REMOTE CONTROL FUNCTIONS
Tiger I / T-34/85
-12-
Note
The various functions can be combined to simulate realistic movement of the tank in the terrain.
Below are some examples, whereby your own and new combinations can be devised:
Drive + cannon right/left
Drive + cannon firing function
Turn tank + MG firing function
Combining several functions consumes more battery power than using
individual functions separately.
REMOTE CONTROL BINDING
The code-binding was already done ex works, so that the remote control and the receiver
are directly connected to each other.
If the remote control and receiver were purchased separately, or the remote control was
used for a different model, the binding must be performed again.
This is done as described below:
1. Inserting the batteries into the remote control with the correct polarity.
2. Press and hold "On/Off" on the remote control for approx. 2 seconds
3. The sound will start and the power indicator on the remote control will light up.
The remote control is now ready for operation.
4. Press and hold "Engine Start/Stop" on the remote control and at the same time
press the on/off switch on the underside of the model to "ON".
5. As soon as you hear sound and the model's headlights light up, the binding is complete
and the model is connected to the remote control.
English