Torqueedo Power 26-77, Руководство по эксплуатации

Страница: 6 / 9

- 6 -
5.2 Battery state of charge display
LED Description
20 blinking Remaining charge below 19%
20 constant Remaining charge between 20% – 39%
40 constant Remaining charge between 40% - 59%
60 constant Remaining charge between 60% - 79%
80 constant Remaining charge between 80% - 97%
100 constant The battery is fully charged (over 97%)
The LED’s on und off do not have any function.
5.3 Ventilation
In order to avoid any over pressure Torqeedo Power is equipped with a ventilation on
the backside of the hermetically closed housing and a hydrophobic membrane.
•
Do not damage the ventilation.
•
Do not cover the ventilation.
•
In case of damage please contact the Torqeedo Service.
6. Installation
Only qualified personnel are allowed to install Torqeedo-Power batteries.
Please take care that the wire cross section corresponds to the mentioned values in
the table.
We do not recommend
using wire cross sec-
tions
smaller than
25mm².
Cable loss in Watts depending on wire cross section and length of
cable.
For Torqeedo Cruise 2.0, 24V, 2.000 W
Wire cross section in mm²
□
cable losses < 2.5%
■
cable losses > 2.5%
L
e
n
g
th
o
f c
a
b
le