Torque XCREATE-4CCHM, Руководство по сборке

Страница: 2 / 28

50 180
3
190 150 170 160
6
130 140 120 90 110 100 40 30 10 70 60 20 80
1 2 4 5 7
200
ITEM PART NUMBER DESCRIPTION QTY
1 5642301 WLDMT, BASE SUPPORT 1
2 5581301 COVER, FRONT BASE 1
3 56443PA PTD ASSY, TOP BOOM SUPPORT 1
4 2001301 WASHER, FLAT 1/2 SAE ST ZN 32
5 2005816 BOLT, 1/2-13 X 4-1/4" (108mm) SOCKET HEAD 16
6 2001401 NUT, 1/2-13 LK ST ZN 16
7 5642701 WLDMT, WEIGHT STACK BASE 1
8 5643201 GUIDE ROD, 19 DIA X 1912 2
9 5513601 CUSHION, WEIGHT STACK 2
10 56350PA PTD ASSY, 15 LB WEIGHT PLATE 10
11 56349PA PTD ASSY, 10 LB WEIGHT PLATE 5
12 56351PA PTD ASSY, 20 LB WEIGHT PLATE 15
13 56435PA PTD ASSY, HEAD PLATE 1
14 5095301 SHAFT COLLAR, GUIDE ROD 2
15 5667301 BUSHING, GUIDE ROD RETAINER 2
16 5644001 TUBE, SLIDE UPRIGHT 1
17 5661701 ASSY, CARRIAGE 1
18 5672101 BUMPER, CARRIAGE STOP 1
19 2008409 BOLT, 3/8-16 X 2-1/2" (64mm) ST HT SOCKET HEAD 2
20 2001101 WASHER, FLAT 3/8 SAE ST ZN 19
21 2001201 NUT, 3/8-16 LK ST ZN 7
22 56445PA PTD ASSY, TOP BOOM 1
23 2009418 BOLT, 3/8-16 X 4-3/4" (121mm) ST HT SOCKET HEAD W/NP 2
24 5094501 PULLEY, 4-1/2 OD X 25 1
25 5669001 COVER, 4.5 PULLEY 1
26 2008407 BOLT, 3/8-16 X 2" (51mm) ST HT SOCKET HEAD 1
27 5645001 CABLE ASSY, XCREATE CABLE COMPONENT 1
28 5508801 HOUSING, CABLE COUPLER 2
29 5508901 GROMMET, RUBBER CABLE 2
30 5509001 CORE, CABLE COUPLER 2
31 2003201 CAP SCREW, M5 X 0.8 X 6MM SOCKET HEAD 4
32 5675401 LABEL, WEIGHT STACK 10-110 LB (4.9-49.9 KG) 1
33 5675501 LABEL, WEIGHT STACK 10-160 LB (4.5-72.6 KG) 1
34 5662501 WLDMT, LEFT SHROUD BASE 1
35 2008414 BOLT, 3/8-16 X 3-3/4" (95mm) ST HT SOCKET HEAD 4
36 5662901 WLDMT, RIGHT SHROUD BASE 1
37 5645101 SHROUD, XCREATE CABLE STATION 2
38 5664701 SHROUD, TOP CAP 1
ITEM PART NUMBER DESCRIPTION QTY
39 2002101 WASHER, FLAT 1/4 SAE ST ZN 8
40 2006502 BOLT, 1/4-20 X 1/2" (13mm) SOCKET HEAD W/NP 6
41 5676101 PLACARD, XCREATE-CC-101 1
42 5659601 WLDMT, ACCESSORY HOLDER 4
43 5091801 SNAP HOOK, 8MM DIA X 80MM 2
44 5324701-A ASSY, SHORT STRAP HANDLE 2
45 5324601-A ASSY, LEG BOOT D-RING 1
46 5676401 ROPE, SINGLE HAND TRICEPS 2
47 2005509 BOLT, 1/4-20 X 3/8" (9mm) SOCKET HEAD 2
48 5692601 WLDMT, XCREATE REAR SHROUD (OPTIONAL) 1
49 2009403 BOLT, 3/8-16 X 1" (25mm) ST HT SOCKET HEAD W/NP 4
NOTE:
X-CREATE CABLE STATIONS can be customized in many ways. This
manual provides instructions for assembling a single stand-alone unit.
If you worked with Torque X-Team Design during the purchasing process,
please request a Bill of Material Drawing to reference your exact set-up.
For assistance, contact www.sales@torquefitness.com or call
(763) 754-7533; Toll free in USA (877) 867-7854.
NOTE:
When assembling any X-CREATE CABLE STATIONS that is longer than
one module wide, the hardware will be shared between two side-by-side
modules. It is recommended to keep all bolt connections loose until all the
cable stations have been fully assembled, then securely tighten all frame
connections.
TOOLS FOR ASSEMBLY:
3/8" ALLEN WRENCH •
5/16" ALLEN WRENCH •
3/16" ALLEN WRENCH •
3/4" WRENCH OR SOCKET •
9/16" WRENCH OR SOCKET •
1/2" WRENCH OR SOCKET •
RUBBER MALLET •
2