manualshive.com logo in svg

Torque X-CREATE BRIDGE SPACE, Инструкция по сборке

Поделиться
Скачать
Torque X-CREATE BRIDGE SPACE Скачать руководство пользователя страница 2

NOTE:

X-CREATE Wall Space Systems can be customized in countless ways.  This

manual provides instructions for assembling base units, module options and

attachment options.  If you worked with Torque X-Team Design during the 

purchasing process, please request a Bill of Material Drawing to reference your

exact set-up.  For assistance, contact 

[email protected]

 or call 

(763) 754-7533; Toll free in USA (877) 867-7854.

NOTE:

When assembling any X-CREATE System that is longer than one module wide, 

the hardware will shared between two side by side modules and pull-up bars.  

It is recommended to keep all bolt connections loose until the base system and

all of the module stations have been assembled.  Securely tighten all frame 

connections at this time, and then proceed to the attachment options.  

Attachment options can be securely tightened as they are assembled. 

TOOLS FOR ASSEMBLY:

3/8" ALLEN WRENCH

•

5/16" ALLEN WRENCH

•

3/16" ALLEN WRENCH

•

3/4" WRENCH OR SOCKET

•

9/16" WRENCH OR SOCKET

•

1/2" WRENCH OR SOCKET

•

RUBBER MALLET

•

TABLE OF CONTENTS

BRIDGE ASSEMBLY: 

PAGES 4-9

1.

MODULE ASSEMBLY

2.

8' UPRIGHT EXTENSION MODULE: 

PAGE 12

•

STORAGE MODULE: 

PAGES 14-17

•

STALL BAR MODULE: 

PAGE 19

•

BALL & HANGING STORAGE MODULE: 

PAGES 21-24

•

BALL TARGET WALL MODULE: 

PAGE 26

•

BALL TARGET WALL REVERSE SIDE: 

PAGES 27-28

•

8' OLYMPIC LIFTING STATION MODULE: 

PAGES 30-33

•

ATTACHMENT ASSEMBLY

3.

BALL & HANGING STORAGE EXTENSION: 

PAGE 36

•

BATTLE ROPE ANCHOR: 

PAGE 37

•

HANGING STORAGE HOOK: 

PAGE 38

•

DOUBLE PLAY: 

PAGE 39

•

HORIZONTAL MOUNT GROUND ROTATIONAL TRAINER: 

PAGE 40

•

3-DIMENSIONAL SWIVEL ON UPRIGHT: 

PAGES 41-42

•

BALL TARGET: 

PAGES 43-45

•

RESISTANCE BAND ANCHOR: 

PAGE 46

•

VERTICAL DUMBBELL STORAGE - 4 PAIR: 

PAGE 47

•

ENDLESS ROPE DRUM (VERTICAL MOUNT): 

PAGES 48-49

•

ENDLESS ROPE DRUM (HORIZONTAL MOUNT): 

PAGES 50-51

•

3 DIMESIONAL SWIVEL W/ MOUNT:

 PAGE 52

•

ROCK CLIMBING KIT: 

PAGE 53

•

ATTACHMENT ANCHOR: 

PAGE 54

•

DIP ATTACHEMNT: 

PAGE 55

•

PLYO STEP: 

PAGE 56

•

ANCHORING: 

PAGE 57

4.

URETHANE BOOT: 

PAGE 58

5.

WARNING!

ALL X-CREATE ARE REQUIRED TO BE ANCHORED TO THE

FLOOR TO PREVENT ROCKING OR TIPPING DURING USE.

2

Содержание X-CREATE BRIDGE SPACE



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды