WARNING:
Always wear safety glass-
es. Everyday eyeglasses are not safety
glasses. Also use face or dust mask if
cutting operation is dusty. Always wear
certified safety equipment.
WARNING:
Always wear proper per
-
sonal hearing protection that conforms
to ansi s12.6 (S3.19) During use.
WARNING:
Some dust created by
polishing contains chemicals known
to the state of California to cause can-
cer, birth defects or other reproductive
harm. Some examples of these chemi
-
cals are:
• lead from lead-based paints
•
crystalline silica
•
arsenic and chromium from chemi-
cally-treated lumber
WARNING:
use of this tool can gen-
erate and/or disperse dust, which may
cause serious and permanent respira
-
tory or other injury. Always use niosh/
osha approved respiratory protection
appropriate for the dust exposure.
and cause loss of control or kickback.
5. Do not attach a saw chain woodcarv-
ing blade or toothed saw blade. Such
blades create frequent kickback and
loss of control.
EXTENSION CORD
An extension cord must have adequate
wire size (AWG or American Wire Gauge)
for safety. The smaller the gauge num-
ber of the wire, the greater the capacity
of the cable, that is 16 gauge has more
capacity than 18 gauge. An undersized
cord will cause a drop in line voltage re
-
sulting in loss of power and overheating.
When using more than one extension to
make up the total length, be sure each
individual extension contains at least
the minimum wire size. The following
table shows the correct size to use de
-
pending on cord length and nameplate
ampere rating. If in doubt, use the next
heavier gauge. The smaller the gauge
number, the heavier the cord.
Minimum Gauge for Cord Sets
Ampere
Rating
Volts
Total Lenght of Cord Feet
(meters)
230 V
25
(7,6)
50
(15,2)
100
(30,5)
150
(45,7)
More
Than
No
More
Than
AWG
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12
Not
Recommended
Содержание TORQX
Страница 1: ...Instruction Manual ...
Страница 11: ...NOTE ...
