Form No. 3356-227 Rev A
Z597 Z Master® Diesel Mowers
Model No. For Z597 Diesel Mowers
Setup Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
No parts required
–
Remove parts from the crate.
2
No parts required
–
Check the tire pressure.
3
Rear wheels
2
Install the drive wheels.
Roll bar, right section
1
Roll bar, left section
1
Roll bar, center section
1
Bolt (3/8 x 1 inch)
8
Curved washer
8
Flange nut (3/8 inch)
8
Bolt (1/2 x 3–1/4 inch)
2
4
Flange nut (1/2 inch)
2
Install the Rollover Protection
System (ROPS).
5
No parts required
–
Adding diesel to the machine.
6
No parts required
–
Charge the battery.
7
Number 2 general purpose lithium
base or molybdenum base grease.
(Purchase separately.)
1 tube
Check the machine for grease.
8
No parts required
–
Check the engine oil level.
9
No parts required
–
Prepare the side discharge chute.
10
No parts required
–
Check the machine before delivery
to the customer.
Operator’s Manual
1
Parts Catalog
1
Engine Owner’s Manual
1
Registration Card
1
Safety Video
1
11
Key
2
Delivering the machine to the
customer.
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
