Toro Z590 Z Master, Инструкции по установке

Страница: 1 / 12

Form No. 3361-758 Rev A
Z590 Z Master ® Diesel Mowers
For Z590 Diesel Mowers
Setup Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove parts from the crate.
2
No parts required
–
Check the tire pressure.
3
Rear wheels 2 Install the drive wheels.
Roll bar, right section 1
Roll bar, left section 1
Roll bar, center section 1
Bolt, (3/8 x 1 inch) 8
Curved washer 8
Flange nut, (3/8 inch) 8
Bolt, (1/2 x 3–1/4 inch) 2
4
Flange nut, (1/2 inch) 2
Install the Rollover Protection System
(ROPS).
5
No parts required
–
Add fuel to the machine.
6
No parts required
–
Charge the battery.
7
Number 2 general purpose lithium base
or molybdenum base grease. (Purchase
separately.)
1 tube Check the machine for grease.
8
No parts required
–
Check the engine oil level.
9
No parts required
–
Prepare the side discharge chute.
10
No parts required
–
Check the machine before delivery to
the customer.
Operator’s Manual 1
Engine Owner’s Manual 1
Registration Card 1
Operator training material 1
11
Key 2
Delivering the machine to the customer.
© 2009—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved