Toro Z590-D Z Master, Руководство оператора

Страница: 14 / 68

Product Overview
Figure 4
1. Z Stand
©
6. Fuel cap (both sides)
2. Height-of-cut lever 7. Parking brake lever
3. Motion control lever 8. Mower deck
4. Seat belt 9. Caster wheel
5. Roll bar
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 4 and Figure 5).
Figure 5
1. Ignition switch 4. Throttle control
2. Glow plug light 5. Power take off (PTO)
Switch
3. Engine Temperature light 6. Hour meter
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 5).
Safety Interlock Indicators
There are symbols on the hour meter and they indicate
with a black triangle that the interlock component is in
the correct position (Figure 6).
Battery Indicator Light
When the ignition key is initially turned to the Run
position for a few seconds, the battery voltage will be
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
14