Toro Z550 Z Master, Руководство оператора

Страница: 34 / 60

Fuel System
Maintenance
Replacing the Fuel Filter
Service Interval: Every 200 hours or yearly, whichever
occurs first.
Never install a dirty filter if it is removed from the fuel
line.
1. Disengage the PTO, move the motion control levers
to the neutral locked position, and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Allow the machine to cool down.
4. Close the fuel shutoff valve (Figure 39).
Figure 39
1. Fuel filter 3. Fuel shutoff valve
2. Hose clamp
5. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 39).
6. Remove the filter from the fuel lines.
7. Install a new filter and move the hose clamps close
to the filter (Figure 39).
8. Open the fuel shutoff valve.
Servicing the Fuel Tank
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or
explosion from gasoline can burn you and
others and can damage property.
• Drain gasoline from the fuel tank when the
engine is cold. Do this outdoors in an open
area. Wipe up any gasoline that spills.
• Never smoke when draining gasoline, and
stay away from an open flame or where a
spark may ignite the gasoline fumes.
1. Park the machine on a level surface to ensure that
the fuel tanks drain completely.
2. Disengage the power takeoff (PTO), set the parking
brake, stop the engine, and remove the key.
3. Close the fuel shutoff valve (Figure 39).
4. Loosen the hose clamp at the fuel filter and slide it
up the fuel line away from the fuel filter (Figure 39).
5. Disconnect the fuel line from the fuel filter
(Figure 39).
6. Open the fuel shutoff valve.
Note:
Allow gasoline to drain into a fuel container
can or drain pan (Figure 39).
Note:
Now is the best time to install a new fuel
filter because the fuel tank is empty.
7. Install the fuel line onto the fuel filter. Slide the hose
clamp close to the fuel filter to secure the fuel line
(Figure 39).
34