Toro Z MASTER Z287L, Руководство оператора

Страница: 23 / 56

23
5. Repeat the adjustment on the other gage wheels.
m–4167
1
2
3
4
5
Figure 20
1. Gage wheel
2. Stud
3. Spring disk
4. Flange nut
5. Wheel nut and washer.
Do not remove.
Positioning the Seat
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are
most comfortable.
1. To adjust, move the lever sideways to unlock the seat
(Fig. 21).
2. Slide the seat to the desired position and release the
lever to lock the seat in position.
1
m–3655
Figure 21
1. Adjustment lever
Pushing the Machine by Hand
Important
Always push the machine by hand. Never
tow the machine because hydraulic damage may occur.
To Push the Machine
1. Disengage the power take off (PTO) and turn the
ignition key to Off. Move the levers to the neutral
locked position and apply the parking brake.
2. Rotate the by-pass valves counterclockwise 1 turn to
push. This allows hydraulic fluid to by-pass the pump
enabling the wheels to turn (Fig. 22).
Important
Do not rotate the by-pass valves more than
1 turn. This prevents the valves from coming out of the
body and causing fluid to run out.
3. Disengage the parking brake before pushing.
Changing to Machine Operation
Rotate the by-pass valves clockwise 1 turn to operate the
machine (Fig. 22).
Note: The machine will not drive unless the by-pass valves
are turned in.
m–5779
1
Figure 22
1. By-pass valve
Transporting the Machine
Use a heavy-duty trailer or truck to transport the machine.
Ensure that the trailer or truck has all necessary lighting
and marking as required by law. Please carefully read all
the safety instructions. Knowing this information could
help you, your family, pets, or bystanders avoid injury.
To transport the machine:
•
Lock the brake and block the wheels
•
Securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes.
•
Secure a trailer to the towing vehicle with safety chains.