Toro Z Master Professional 5000 Series, Руководство оператора

Страница: 53 / 80

g021395
g013117
Figure 60
1. Engine block 2. Negative (–) cable
7. Start the machine and remove the cables in
the reverse order of connection (disconnect the
negative cable from the engine block first.).
Drive System
Maintenance
Checking the Seat Belt
Service Interval: Before each use or daily
Inspect the seat belt for wear, cuts, and proper
operation of retractor and buckle. Replace the seat
belt if it is damaged.
Checking the Rollover
Protection System (ROPS)
Knobs
Service Interval: Before each use or daily
WARNING
To avoid injury or death from rollover: keep
the roll bar in the fully raised locked position
and use the seat belt.
Ensure that the seat is secured to the
machine.
Check that both the mounting hardware and the knobs
are in good working condition. Make sure that the
knobs are fully engaged with the roll bar in the raised
position. The upper hoop of the roll bar may need
to be pushed forward or pulled rearward to get both
knobs fully engaged (
Figure 61 ).
53