G013506
1
2
3
Figure 5
1.
Locknut (1/2 inch)
3.
Bolt (1/2 x 3-1/4 inch)
2.
ROPS
7
Checking the Machine for
Grease
Parts needed for this procedure:
1 tube
Number 2 general purpose lithium base or
molybdenum base grease. (Purchase separately.)
Procedure
1. Check the grease for the three spindle bearings and
the idler pulley. If needed, add grease until it comes
out of the lower seals.
G009029
Figure 6
2. Check the grease for the pump drive belt idler arm.
Figure 7
3. Check the grease in the caster pivots and caster
wheel bearings (Figure 8).
Figure 8
4
