Form No. 3365-290 Rev A
Z Master
®
G3 Riding Mower
with 60in or 72in TURBO FORCE
®
Side Discharge Mower
Model No. 74975—Serial No. 310000001 and Up
Model No. 74977—Serial No. 310000001 and Up
Setup Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Unfold the crate.
2
No parts required
–
Check the tire pressure.
3
No parts required
–
Charge the battery.
4
No parts required
–
Check the engine oil level.
5
No parts required
–
Add fuel to the machine.
Bolt (1/2 x 3-1/4 inch)
1
6
Locknut (1/2 inch)
1
Install ROPS Hardware
7
Number 2 general purpose lithium base
or molybdenum base grease. (Purchase
separately.)
1 tube
Check the machine for grease.
8
No parts required
–
Prepare the side discharge chute.
9
No parts required
–
Check the machine before delivery to
the customer.
Operator’s Manual
1
Engine Owner’s Manual
1
Registration Card
1
Operator training material
1
10
Key
2
Delivering the machine to the customer.
1
Unfolding the Crate
No Parts Required
Procedure
Refer to the Packaging Crate Instructions included with
the machine.
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Note:
The front caster wheel is a semi-pneumatic tire
and does not need to be checked.
Check the air pressure in the drive tires.
© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
