Toro Workman 133-3016, Руководство по установке

Страница: 4 / 8

4. Plug the female connector from the main wire
harness to the male connector on the horn
switch (
Figure 7 ).
g034702
Figure 7
1. Female connector (main
wire harness) 2. Male connector (horn
switch)
For Electric GTX Vehicles
1. Reach under the dash bracket and push the
existing plastic plug out.
2. Reach under the dash bracket and install the
horn switch into the opening (
Figure 5 ).
3. Install the rubber button to the horn switch
(
Figure 6 ).
4. Plug the female connector from the main wire
harness to the male connector on the horn
switch (
Figure 7 ).
4
Installing the Fuse
Parts needed for this procedure:
1 Fuse (30 A)
For Gasoline GTX Vehicles
For machines with serial number 403999999 and
before:
Install the fuse (30 A) into the opening in the fuse
block (
Figure 8 ).
g034703
Figure 8
1. Fuse block 2. Fuse (30 A)
For machines with serial number 404000000 and
after:
Install the fuse (30 A) into the opening in the fuse
block (
Figure 9 ).
g305905
Figure 9
1. Fuse (30 A)
4