Toro Workman 133-3016, Руководство по установке

Страница: 3 / 8

For Electric GTX Vehicles
1. Release the rubber straps on both sides of the
hood and raise the hood.
2. Install the 48 V horn assembly to the existing
hole in the dash bracket with the hex-head
screw (5/16 x 3/4 inch) and flange nut (5/16
inch) as shown in
Figure 3 .
Note:
The bracket on the horn assembly and
the flange nut (5/16 inch) are located on the
inside of the dash bracket (
Figure 3 ).
g034699
Figure 3
1. Flange nut (5/16 inch) 3. 48 V horn assembly
2. Hex-head screw (5/16 x
3/4 inch)
3. Plug the 2 female connectors from the main wire
harness into the 2 male connectors on the 48
V horn (
Figure 4 ).
g034660
Figure 4
1. Male connector 2. Female connector
3
Installing and Connecting
the Horn Switch
Parts needed for this procedure:
1 Horn switch
1 Rubber button
For Gasoline GTX Vehicles
1. Reach under the dash bracket and push the
existing plastic plug out.
2. Reach under the dash bracket and install the
horn switch into the opening (
Figure 5 ).
g034700
Figure 5
1. Horn switch 2. Dash bracket
3. Install the rubber button to the horn switch
(
Figure 6 ).
g034701
Figure 6
1. Rubber button 2. Horn switch
3