Toro Workman 07347, Руководство оператора, Страница: 8 / 28

g023165
Figure 3
1. Screw 2. Cover plate
4. Disconnect the reservoir hose from the radiator
and plug or clamp it to retain coolant (
Figure 3 ).
Note:
If your machine is equipped with a black
pressurized tank, leave the hoses connected
and lift the tank off the shroud.
5. Remove the operator shield from the ROPS.
Removing the Center Console
Panel from the Workman HDX-Auto
Machines
1. Remove all knobs from console levers and from
the transmission lever by rotating the knobs
counterclockwise (
Figure 4 ).
g024571
Figure 4
1. Brake lever 5. Transmission lever (L
position) knob
2. Hydraulic-lift lever knob 6. Hydraulic-lift lock (locked
position — left)
3. Speed-range lever knob 7. Speed-range lever (A
position)
4. Transmission lever knob
2. Remove the 4 hex-head screws that secure the
shift-indicator cover to the seat shroud (
Figure
5 ).
g024588
Figure 5
1. Indicator connector 4. Control cover
2. Shift-indicator cover 5. Machine-harness
connector
3. Hex-head screws
3. Lift the shift indicator up, disconnect the
indicator connector from the machine-harness
connector, and remove the indicator cover from
the machine (
Figure 5 ).
4. Remove the 6 hex-head screws that secure the
control cover to the seat shroud, and remove the
control cover (
Figure 5 ).
8