Toro Wheel Horse 16-38 XLE, Руководство оператора

Страница: 37 / 52

Maintenance
35
6. Slowly pour approximately 80% of the specified
amount of oil into the filler tube (Fig. 31). Check
the oil level; refer to Checking Oil Level,
page 34, steps 4–5.
m–1869
1
2
Figure 32
1. Oil drain plug 2. Oil dipstick/fill tube
Cutting Blade
To assure a superior quality of cut, keep the blade(s)
sharp. For convenient sharpening and replacement,
you may want to have an extra blade(s).
POTENTIAL HAZARD
•
A blade that is worn or damaged could
break apart and pieces could be thrown at
bystanders or at you as you use the mower.
WHAT CAN HAPPEN
•
Pieces of blade that may be thrown could
seriously injure or kill you or bystanders.
HOW TO AVOID THE HAZARD
•
Periodically inspect the blade for wear and
damage. Immediately install a new blade if
it is worn or damaged.
Inspecting the Blade(s)
1. Remove the mower; refer to Removing the
Mower, page 37.
2. Inspect the cutting edges (Fig. 33). If the edges
are not sharp or have nicks, remove the blade(s)
and sharpen them; refer to Sharpening the
Blade(s), page 36.
3. Inspect the blade(s), especially the curved area
(Fig. 33). If you notice any damage, wear, or a
slot forming in this area (Fig. 33), immediately
install a new blade.