Toro wheel horse 15-38 HXL, Руководство оператора

Страница: 38 / 52

Maintenance
36
Figure 37
1. Spring
2. Bolt
3. Spring tool
1
2
3
1851
POTENTIAL HAZARD
•
The height-of-cut lever (deck lift) is
spring-tensioned.
WHAT CAN HAPPEN
•
When the mower is being removed, this
spring-loaded mechanism could suddenly
release and injure you or someone else.
HOW TO AVOID THE HAZARD
•
Move the height-of-cut lever (deck lift) to
the “D” position and remove the
height-of-cut lift assist spring to release the
spring tension.
5. Move the height-of-cut lever (deck lift) into the
“A” notch.
6. Unhook the blade control (PTO) cable ring end
from the idler spring (Fig. 38).
7. Remove rubber wiper and jam nut from blade
control (PTO) cable at mounting bracket. Slide
the cable from the bracket (Fig. 38).
8. Move the cable out of the way and lay inside
frame rail so it cannot get caught in drive belts
or pulleys.
1
3
4
5
2384
2
Figure 38
1. Blade control (PTO) cable
2. Ring end
3. Idler spring
4. Jam nut
5. Mounting bracket
9. Remove the bolts and lock nuts and pull the two
mower pivot mount brackets down from the
front axle (Fig. 39).
m–4187
1
2
3
Figure 39
1. Pivot mount bracket
2. Bolt 5/16–18 x 2-1/2”
3. Lock nut