![Toro Wheel Horse 13-38 XL Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/toro/wheel-horse-13-38-xl/wheel-horse-13-38-xl_operators-manual_1132512034.webp)
Maintenance
32
Cutting Blade
To assure a superior quality of cut, keep the blade(s)
sharp. For convenient sharpening and replacement,
you may want to have an extra blade(s).
POTENTIAL HAZARD
•
A blade that is worn or damaged could
break apart and pieces could be thrown at
bystanders or at you as you use the mower.
WHAT CAN HAPPEN
•
Pieces of blade that may be thrown could
seriously injure or kill you or bystanders.
HOW TO AVOID THE HAZARD
•
Periodically inspect the blade for wear and
damage. Immediately install a new blade if
it is worn or damaged.
Inspecting the Blade(s)
1.
Remove the mower; refer to Removing the
Mower, page 34.
2.
Inspect the cutting edges (Fig. 33). If the edges
are not sharp or have nicks, remove the blade(s)
and sharpen them; refer to Sharpening the
Blade(s), page 33.
3.
Inspect the blade(s), especially the curved area
(Fig. 33). If you notice any damage, wear, or a
slot forming in this area (Fig. 33), immediately
install a new blade.
Figure 33
1.
Cutting edge
2.
Curved area
3.
Wear/slot forming
151
1
2
3
Removing the Blade
1.
Remove the mower; refer to Removing the
Mower, page 34.
2.
Carefully tip the mower over.
3.
Remove the bolt (5/8” wrench), curved washer,
retainer and blade (Fig. 34). A block of wood
may be wedged between the blade and the
mower to lock the blade when you are removing
the bolt.
4.
Inspect all parts. If a defect or damage is noticed,
install new parts.
Figure 34
1.
Bolt
2.
Retainer
3.
Blade
4.
Spindle
5.
Curved washer
1
2
3
4
5
1886
Содержание Wheel Horse 13-38 XL
Страница 7: ...Safety 5 Slope Chart Read all safety instructions on pages 2 4...
Страница 8: ...6...
Страница 22: ...Maintenance 20 Wiring Diagram...