Toro TX 427 22342HD, Руководство оператора

Страница: 28 / 52

Figure 33
1. Nut 3. Front screen
2. Oil cooler 4. Shoulder bolts
7. Remove the front screen.
8. When finished, install the front screen with the 4 bolts
removed previously.
9. Install the oil cooler to the front screen with the 4
shoulder bolts and nuts removed previously.
10. Slide the sloped plate between the frame and the
weights and secure it to the front screen grill using the
carriage bolts and nuts removed previously (
Figure 31 ).
11. Tighten the bolts securing the front weights ( Figure 31 ).
12. Install the side screens and close the hood.
Lubrication
Greasing the Traction Unit
Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease.
1. Lower the loader arms and shut off the engine.
Remove the key.
2. Clean the grease fittings with a rag.
3. Connect a grease gun to each fitting ( Figure 34 ).
Figure 34
4. Pump grease into the fittings until grease begins to
ooze out of the bearings (approximately 3 pumps).
5. Wipe up any excess grease.
28