Toro TURBO FORCE 39678, Руководство оператора, Страница: 26 / 52

Lubrication
Greasing the Machine
Grease the machine more often in dirty or dusty
conditions.
Grease Type: No. 2 lithium or molybdenum grease
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean the grease fittings with a rag.
Note:
Scrape any paint off the front of the
fitting(s).
4. Pump grease into the fittings until grease begins
to ooze out of the bearings.
5. Wipe up any excess grease.
Lubricating the Caster and
Wheel Bearings
1. Lubricate the front wheel bearings and front
spindles (
Figure 20 ).
2. Lubricate the drive-wheel bearings ( Figure 20 ).
g001457
Figure 20
Greasing the Transmission
Couplers
Lubricate the transmission couplers and idler-arm
pivots located at the rear of the machine (
Figure 21 ).
g001458
Figure 21
Greasing the Mower Belt
Idler
Grease the fitting on the mower belt idler arm pivot
(
Figure 22 ).
Note:
Remove the mower deck cover to access the
grease fitting for the mower belt idler arm.
g001781
Figure 22
26