Toro TM5490, Руководство оператора

Страница: 8 / 94

1.8 1.8
Preparation
Check that the machine complies with all applicable regulations, including those in force when used on the
public highway. Check that the lights are in full working order and function correctly from the tractor.
While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when
barefoot or wearing open sandals. Eye protection should be worn.
Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown
by the machine.
Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or
damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.
Ensure that the cutterheads are fully raised with the transport latches and safety locks engaged in position, and
that the PTO drive is disengaged and correctly stowed when disconnected before transporting the mower.
When transporting the mower with the PTO shaft assembly disconnected from the tractor PTO drive, the PTO
shaft assembly must be stowed securely to the mower chassis or tractor.
Check that the PTO shaft is fully engaged to the drive, driven shafts and that the guard safety chains are
secure.
Check the condition of the tyres and ensure that they are inflated to the correct pressures, refer to
SPECIFICATIONS . This is particularly important if the machine is to be taken on the public highway.
Check that the mower is in good working order, paying particular attention to the brakes, drawbar, tyres and
lights. Check that all safety guards are in position and that the tractor complies with all applicable regulations
including those in force when used on a public highway.
Ensure that the automatic breakaway cable is secured correctly between the tractor and the machine brake
operating system.
Replace a broken, frayed or damaged breakaway cable.
Ensure that the parking brake operates correctly through its full travel without interference.
Ensure that the brakes are kept clean and adjusted regularly.
Ensure that the brake coupling mechanism is mounted securely in position, is correctly adjusted and
maintained, and operates through its full working travel without interference.
Replace the towing unit if the sliding mechanism or towing eye is excessively worn.
In the event of a breakaway cable being activated ensure that there is no interference on the brake coupling
mechanism.
Replace damaged or worn brake coupling mechanism components with the correct Toro service parts.
Never make an unauthorised modification to any part of the machine or brake coupling mechanism.
Ensure that the hydraulic brake actuating system operates through its full working travel without interference.
SAFETY PRECAUTIONS