B. Slide the seat rod out from the brackets and seat frame.
C. Rotate the seat 180 degrees and install it into the bracket you removed it from, using the rod and hairpin
cotters removed previously.
D. Connect the interlock switch cable to the seat.
E. Lower the seat into the operating position (Figure 4).
F. Move the control levers back to the center position (neutral) as shown in Figure 4.
G009802
E
F
Figure 4
4. Verify the motion control levers are properly aligned (Figure 5). Adjust as necessary. Tighten all fasteners.
G009803
Figure 5
3