Form No. 3360-964 Rev A
TITAN Zero-Turn-Radius Riding Mowers
Model No. All Models
Setup Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Connect the battery.
2
No parts required
–
Set up the motion control levers and the
Seat.
Ignition Key
1
Hose coupling
1
Operator’s Manual
1
Engine Operator’s Manual
1
3
Operator Training Material
1
Complete the Setup.
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Connecting the Battery
No Parts Required
Procedure
1. Locate the battery and negative battery cable in the
center of the machine.
2. Remove the black plastic cap from the negative
battery post. Remove the fasteners from the negative
battery cable and use them to secure the negative
battery cable to the negative battery post (Figure 1).
G010257
1
2
3
5
4
Figure 1
1.
Bolt
4.
Negative battery post
2.
Washer
5.
Nut
3.
Negative battery cable
© 2009—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved