Toro TITAN HD 1500, Руководство оператора

Страница: 54 / 88

Installing the Filters
Important:
To prevent engine damage, always
operate the engine with the air filter and the cover
installed.
1. If you are installing a new filter, check the filter
for shipping damage.
Note:
Do not use a damaged filter.
2. Carefully slide the filter into the air-cleaner body
(
Figure 73 ).
Note:
Ensure that the filter is fully seated by
pushing on the outer rim while installing it.
Important:
Do not press on the soft, inside
area of the filter.
3. Install the air-cleaner cover and secure the
latches (
Figure 73 ).
Servicing the Engine Oil
Engine-Oil Specifications
Oil Type: Detergent oil (API service SF, SG, SH, SJ,
or SL)
Crankcase Capacity: 2.4 L (81 fl oz) with oil filter
Viscosity: See the table below.
g029683
Figure 73
Checking the Engine-Oil Level
Service Interval: Before each use or daily—For Toro
engines—check the engine-oil level.
Note:
Check the oil when the engine is cold.
Important:
If you overfill or underfill the engine
crankcase with oil and run the engine, you may
damage the engine.
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
Note:
Ensure that the engine is cool so that the
oil has had time to drain into the sump.
3. To keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil-fill cap and
dipstick before removing it (
Figure 50 ).
g029368
Figure 74
Changing the Engine Oil and Oil Filter
Service Interval: After the first 5 hours/After the first
month (whichever comes first)—For
Toro engines—change the engine
oil and filter.
Every 100 hours/Yearly (whichever comes
first)—For Toro engines—change the engine
54