Toro TITAN HD 1500, Руководство оператора, Страница: 40 / 88

by a safety device. Check their proper operation
regularly.
•
Check the parking brake operation frequently.
Adjust and service as required.
Lubrication
Greasing the Machine
Service Interval: Every 25 hours—Grease the front
caster axles. (more often in dirty or
dusty conditions).
Every 50 hours—Grease the pump-idler pivot.
Grease Type: No. 2 lithium or molybdenum grease
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake; refer to
Engaging the Parking Brake
(page 26) .
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean the grease fittings with a rag.
Note:
Scrape any paint off the front of the
fitting(s).
4. Grease the pump idler-pulley pivot with 1 or 2
pumps of grease (
Figure 44 ).
5. Grease the front caster axles ( Figure 44 ).
g188563
Figure 44
1. Pump-idler pivot 2. Caster axle
6. Wipe up any excess grease.
40