Toro TITAN HD 1500, Руководство оператора, Страница: 21 / 88

g036746
Figure 11
1. Roll bar in the upright
position 4. Rotate the ROPS knob 90
degrees.
2. ROPS knob in the latched
position 5. ROPS knob in the
unlatched position
3. Pull the ROPS knob out. 6. Roll bar in the folded
position
Raising the Roll Bar
Important:
Always use the seat belt with the roll
bar in the raised position.
1. Raise the roll bar to the operating position and
rotate the knobs until they move partially into
the grooves (
Figure 11 ).
2. Raise the roll bar to the full upright position while
pushing on the upper roll bar so that the pins
snap into position when the holes align with the
pins (
Figure 11 ).
3. Push on the roll bar and ensure that both pins
are engaged.
Using the Safety-Interlock
System
WARNING
If the safety-interlock switches are
disconnected or damaged, the machine could
operate unexpectedly, causing personal
injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock
switches daily and replace any damaged
switches before operating the machine.
Understanding the
Safety-Interlock System
The safety-interlock system is designed to prevent the
engine from starting unless:
•
The blade-control switch (PTO) is disengaged.
•
The motion-control levers are in the N
EUTRAL
-
LOCK
position.
•
The parking brake is engaged.
The safety-interlock system is also designed to shut off
the engine when the traction controls are moved from
the locked position with the parking brake engaged or
if you rise from the seat when the PTO is engaged.
The hour meter has symbols to notify the user when
the interlock component is in the correct position.
When the component is in the correct position, a
triangle lights up in the corresponding square.
g187670
Figure 12
1. Triangles light up when the interlock components are in the
correct position
21