Toro TITAN 74891, Руководство оператора

Страница: 28 / 56

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 50 hours
• Change the hydraulic filter and fluid.
Before each use or daily
• Check the safety-interlock system.
• Check the air cleaner for dirty, loose or damaged parts.
• Check the engine-oil level.
• Clean the blower housing (more often under extremely dusty, dirty conditions).
• Check the mower blades.
• Inspect the grass deflector for damage.
After each use
• Clean the mower housing.
Every 25 hours
• Grease all lubrication points.
• Service or replace the air-cleaner foam element (more often under extremely dusty,
dirty conditions).
• Check tire pressure.
• Check the hydraulic-fluid level in the expansion tank.
Every 50 hours
• Inspect the belts for cracks and wear.
Every 100 hours
• Replace the air-cleaner paper element (more often under extremely dusty, dirty
conditions).
• Change the engine oil and the engine-oil filter.
• Clean the cooling fins (more often under extremely dusty, dirty conditions).
• Replace the fuel filter (more often under dusty, dirty conditions).
Every 400 hours
• Change the hydraulic filter and fluid.
Every 500 hours
• Replace the spark plug(s).
Monthly
• Check the battery charge.
Yearly or before storage
• Paint chipped surfaces.
• Check all maintenance procedures listed above before storage.
Important:
Refer to your engine operator's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
28