Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Stabilizer bracket
1
Carriage bolt (5/16 x 3/4 inch)
2
Locknut (5/16 inch)
4
Self-tapping screw (5/16 x 3/4 inch)
2
Bolt (5/16 x 1 inch)
2
Pivot frame
1
Hairpin cotter
2
Rod
2
Washer
2
Use the chart below to verify that all parts have been
shipped.
Loose Parts
1.
Remove the existing 2 bolts, 2 nuts, and hitch
bracket from the bottom of the engine guard
(
).
g308798
Figure 1
1.
Nut
3.
Bolt
2.
Existing hitch bracket
2.
Install the stabilizer bracket to the engine guard
using 2 carriage bolts (5/16 x 3/4 inch) and 2
locknuts (5/16 inch) as shown in
.
g308799
Figure 2
1.
Locknut (5/16 inch)
2.
Carriage bolt (5/16 x 3/4
inch)
3.
Remove the existing 2 self-tapping screws from
the bottom of the machine frame (
).
4.
Loosely install the pivot frame to the machine
frame using 2 bolts (5/16 x 1 inch) and 2 locknuts
(5/16 inch) as shown in .
2