Toro TimeCutter ZD420, Руководство оператора

Страница: 14 / 52

Ignition Switch
The ignition switch has three positions, Off, Run
and Start. The key will turn to Start and move
back to Run upon release. Turing the key to
the Off position will stop the engine; however,
always remove the key when leaving the machine
to prevent the engine from accidentally starting
(Figure 6).
Throttle/Choke Control
The throttle and choke is combined into one
control lever. The throttle controls the engine
speed and it has a continuous variable setting from
Slow to Fast. Engage the choke by moving the
lever past the Fast setting until it stops (Figure 6).
Blade Control Switch (Power
Take-Off)
The blade control switch, represented by a power
take-off (PTO) symbol, engages and disengages
power to the mower blades (Figure 6).
DFS (Dump From Seat )Lever
The DFS (Dump From Seat) lever can be operated
from the seated, operating position or while
standing next to the machine. The lever is seated
loosely to allow it to be extended to gain leverage
when in use and swivels freely to allow for minimal
contact with the operating environment (Figure 5).
Collection Sensors
Once the collection bag fills with enough grass
to cover one or both of the sensors and break
the infrared beam a beeping alarm will sound
to alert the operator. The alarm shuts off once
the blade control switch is turned Off. If one or
both sensors are unplugged the mower blades
will not engage. The collection bag should be
emptied immediately. Continued operation of the
collection system with a full bag may result in
plugging of the deck adapter and discharge chute.
14