4
G005848
1
2
3
4
5
6
Figure 3
1. Bag clip
4. Holes, existing
2. Screw
5. Heat shield
3. Heat shield, backside
6. Bag clip, installed
3. Repeat this procedure for the remaining clip
on the opposing side of the heat shield.
Step
3
Installing the Collection Bag
Parts needed for this step:
1
Collection bag
1
DFS lever
1
Washer
1
Cotter pin
Procedure
1. Remove the DFS lever and collection bag from
the packaging.
2. Install the DFS lever into the opening on the
top of the collection bag Figure 4.
G005849
1
2
3
4
Figure 4
1. DFS lever
3. Washer
2. Collection bag
4. Cotter pin
3. Install a washer over the end of the DFS lever
inside the collection bag (Figure 4).
4. Secure the lever assembly with a cotter pin and
bend the ends to hold it place (Figure 4).
5. Install the collection bag to the machine
(Figure 5). Install the lever side pin in the
collection bag into the retaining hole in the
notch of the engine cover. Seat the opposing
pin into the other notch in the engine cover
and allow the collection bag swing down into
place.
Figure 5
1. Collection bag
3. Retaining hole
2. Engine cover
4. Pin, lever side
3
