Toro TimeCutter Z5035, Руководство оператора

Страница: 26 / 48

4. Connect a grease gun to each fitting (Figure 27 and
Figure 28). Pump grease into the fittings until grease
begins to ooze out of the bearings.
5. Wipe up any excess grease.
Engine Maintenance
Servicing the Air Cleaner
Note:
Service the air cleaner more frequently (every
few hours) if operating conditions are extremely dusty
or sandy.
Removing the Element
1. Park the machine on a level surface and disengage
the blade control (PTO).
2. Move the motion control levers to the brake position,
stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage. Loosen
the two plastic knobs on the cover and remove the
air cleaner cover (Figure 29).
4. Unscrew the wing nuts and remove the paper
element (Figure 29).
G013402
1
2
3
Figure 29
1. Cover 3. Hose clamp
2. Paper element
Cleaning the Element
Service Interval: Every 100 hours—Service the paper
element. (more often in dusty, dirty
conditions)
Every 200 hours/Yearly (whichever
comes first)—Replace the paper
element. (more often in dusty, dirty
conditions)
26