Toro TimeCutter SW3200, Руководство оператора

Страница: 43 / 52

Removing the Mower Deck
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Set the parking brake, stop the engine, remove the key,
and wait for all moving parts to stop before leaving the
operating position.
3. Lower the height-of-cut lever to the lowest position.
4. Remove the hairpin cotter from the front support rod,
and remove the rod from the deck bracket (
Figure
54 ). Carefully lower the front of the mower deck to
the ground.
G014635
1
2
3
Figure 54
1. Front support rod 3. Deck bracket
2. Locking nut
5. Lift the mower deck and hanger brackets clear of the
rear lift rod, and lower the mower carefully to the
ground (
Figure 55 ).
G015338
2
2
3
1
2
2
3
Figure 55
1. Mower deck 3. Rear lift rod
2. Hanger bracket
6. Slide the mower deck rearward to remove the mower
belt from the engine pulley.
7. Slide the mower deck out from underneath the
machine.
Note:
Retain all parts for future installation.
43