Toro TimeCutter SW Series, Инструкции по установке

Страница: 4 / 8

RELEASED Ver-C ©Toro 2016
4
Installing the Seat Assembly
Parts needed for this procedure:
1 Seat assembly
1 Seat rod
2 Hairpin cotter pins
2 Spacers (certain models only)
Procedure
1. Install the seat assembly to the frame with the seat rod,
2 hairpin cotter pins, and 2 spacers (certain models
only) as shown in
Figure 6 .
g027723
Figure 6
1. Seat assembly 3. Hairpin cotter
2. Spacers 4. Seat rod with hairpin cotter
installed
2. Connect the seat switch ( Figure 7 ).
g027695
g027695
Figure 7
3. Route the wire harness to the right side of the machine
and push the plastic connector into the seat frame hole
(
Figure 8 ).
g028383
1 2
g028383
Figure 8
1. Plastic connector in seat
frame hole 2. Wire harness
4