Toro TimeCutter SS 5000, Руководство оператора

Страница: 42 / 52

Removing the Mower
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Move the motion-control levers outward to the P
ARK
position, stop the engine, remove the key, and wait for
all moving parts to stop before leaving the operating
position.
3. Lower the height-of-cut lever to the lowest position.
4. Remove the hairpin cotter from the front support rod
and remove the rod from the deck bracket (
Figure
48 ). Carefully lower the front of the mower deck to
the ground.
G014635
1
2
3
Figure 56
1. Front support rod 3. Deck bracket
2. Locking nut
5. Lift the mower deck and hanger brackets clear of
the rear lift rod and lower the mower carefully to the
ground (
Figure 57 ).
2
2
3
G005077
1
2
2
3
Figure 57
1. Mower deck 3. Rear lift rod
2. Hanger bracket
6. Slide the mower deck rearward to remove the mower
belt from the engine pulley.
7. Slide the mower deck out from underneath the
machine.
Note:
Retain all parts for future installation.
42