Pushing the Machine by Hand
Important:
Always push the machine by hand. Do not
tow the machine, because damage may occur.
This machine has an electric-brake mechanism, and to push
the machine, the ignition key needs to be in the R
UN
position.
The battery needs to be charged and functioning for the
electric brake to be disengage.
Pushing the Machine
1.
Park the machine on a level surface, and disengage the
blade-control switch.
2.
Move the motion-control levers outward to the
PARK
position, shut off the engine, and wait for all moving
parts to stop before leaving the operating position.
3.
Locate the bypass levers on the frame on both sides of
the engine.
4.
Move the bypass levers forward through the key hole
and down to lock them in place (
Note:
Do this for each lever.
5.
Move the motion-control levers inward to the
NEUTRAL
position and turn the ignition key to the R
UN
position.
Note:
Do not start the machine.
Note:
You can now push the machine by hand.
g017303
1 2
3
Figure 22
1.
Bypass-lever locations
3.
Lever position for pushing
the machine
2.
Lever position for
operating the machine
6.
When finished, ensure that the key has been returned to
the S
TOP
position to avoid draining the battery charge.
Note:
If the machine fails to move, the electric brake may
still be engaged. If necessary, the electric brake can be released
manually; refer to
Releasing the Electric Brake (page 35)
.
Operating the Machine
Move the bypass levers rearward through the key hole and
down to lock them in place as shown in
Note:
Do this for each lever.
Grass Deflector
The mower has a hinged grass deflector that disperses
clippings to the side and down toward the turf.
DANGER
Without the grass deflector, discharge cover, or
complete grass catcher assembly mounted in
place, you and others are exposed to blade contact
and thrown debris. Contact with rotating mower
blade(s) and thrown debris will cause injury or
death.
•
Never remove the grass deflector from the mower
because the grass deflector routes material down
toward the turf. If the grass deflector is ever
damaged, replace it immediately.
•
Never put your hands or feet under the mower.
•
Never try to clear discharge area or mower
blades unless you move the blade control switch
to Off and rotate the ignition key to Off. Also
remove the key and pull the wire off the spark
plug(s).
22
Содержание TimeCutter 74750
Страница 47: ...Schematics Electrical Diagram Rev A 47 ...