Toro TimeCutter 74706, Руководство оператора

Страница: 21 / 56

Operating the Throttle
You can move the throttle control between F
AST
and
S
LOW
positions ( Figure 14 ).
Always use the F
AST
position when engaging the PTO.
g187517
Figure 14
Operating the Choke
Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch (
Figure 15 ).
2. Push down the choke knob to disengage the
choke after the engine has started (
Figure 15 ).
g008959
Figure 15
1. O
N
position 2. O
FF
position
Starting the Engine
Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
g027581
Figure 16
21