13
Toro TEMPUS DC LCD Controller 1_2_4_6
FCC Compliance Statement
IC Statement
This product contain a modular approval with FCC ID MCQ-XBS6B
and IC 1846A-XBS6B.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with innovation, Science, and Economic development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
L’émetteur/recepteur exempt de license contenu dans le présent appareil
est conforme aux CNR d’innovation, Science et Dévellopement
économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux condtions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est suceptible d’en compromettre le fonctionnement.
This device complies with FCC and ISED RF radiation exposure limits
set forth for genral population. This device must be installed to provide a
separation distance of at least 20cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.
Le present appareil est conforme aux niveaux limites d’exigences
d’exposition RF aux personnes définies par ISDE. L’appareil doit être
installé afin d’offrir une distance de séparation d’au moins 20cm avec
les personnes et ne doit pas être installé à proximité ou être utilisé en
conjonction avec une autre antenne ou un autre émetteur.
