Advanced Setup
The -advanced -setup -allows -you -to -save -programs, -load -
programs, -specify -a -delay -duration -between -station -activations, -
set -whether -the -module -is -sensor -equipped, -activation -of -the -
radio -(if -equipped) -and -modify -the -Programmer -I.D. -(HHP#). -For -
the -Programmer -I.D. -function, -refer -to -
Hand-Held Programmer
Setup
-on -page -6.
Access -the -advanced -setup -function -by -pressing -the -
DIAL
-button -
until -the -
ADVSET
-is -displayed.
Save an Irrigation Program
Press -the -
NEXT
-button -to -advance -to -
SAVE--
. -This -function -allows -
you -to -save -the -program -parameters -currently -loaded -on -the -
TBC
TM
-
HH -for -easy -programming -of -multiple -controllers. -Press -the -
ON
-or -
OFF
-button -to -assign -a -program -number. -Assigning -an -
existing -program -number -will -overwrite -the -program -previously -
saved. -Press -the -
NEXT
-button -to -save. -Display -will -prompt -
OK
-to -
confirm. -You -can -save -a -total -of -99 -programs.
Load an Irrigation Program
Press -the -
NEXT
-button -to -advance -to -
LOAD--
. -This -function -
allows -you -to -recall -programs -you -previously -saved -for -easy -
programming -of -multiple -controllers. -Press -the -
ON
-or -
OFF
-
button -to -select -the -program -number -you -would -like -to -recall. -
Press -the -
NEXT
-button -to -load. -Display -will -prompt -
OK
-to -confirm.
Station Delay
(
Toro Mode only
) -Press -the -
NEXT
-button -to -advance -to -
DLY :00
-
(Station -Delay). -Select -a -station -delay -time -in -minutes -that -will -
serve -as -pause -between -station -activations. -Press -
A
B
C
D
-to -select -
the -program. -Press -the -
ON
-or -
OFF
-button -to -adjust -the -station -
delay -from -00 -(no -pause) -to -30 -minutes. -Repeat -for -the -remaining -
programs. -Select -the -program -number -you -would -like -to -recall. -
Press -the -
NEXT
-button -to -load. -Display -will -prompt -
OK
-to -confirm.
