Buttons Overview
-– - Transmit -button
-– - Receive -button
ON
-– - ON/+ -(Increase) -button
OFF
-– - OFF/– -(Decrease) -button
A
B
C
D
-– - Program -Select -button
DIAL
-– - Electronic -Dial -button
NEXT
-– - NEXT -button
Battery and Comm Cable Installation
The -
TBC
TM -
HH
-Programmer -is -
powered -by -a -9 -VDC -battery. -
Follow -the -steps -to -install -the -
battery.
Step 1
- - - Remove -the -
programmer’s -back -
cover -by -loosening -the -
three -retaining -screws. -
See -
Figure 2
-insert.
Step 2
- - - Install -the -battery -onto -
the -socket -as -shown -on -
Figure 2
. -
Step 3
- - - To -install/remove -the -
communication -cable, -
remove -or -plug -the -
communication -cable -into -
the -RJ45 -socket -indicated -
on -
Figure 2
. -Once -
installed/removed, -verify -
that -the -rubber -cover -seal -
is -properly -seated.
Step 3
- - - Reinstall -the -programmer’s -back -cover.
Communication Procedure
The -
TBC
TM -
HH
-Programmer -is -designed -to -communicate -with -the -
TBC
TM -
WP
-and -other -battery -operated -controllers -using -an -IR -cable -
that -plugs -into -the -controller’s -communication -receptacle. -See -
Figure 3
. -
The -
TBC
TM -
HH
-can -also -be -purchased -with -an -optional -radio -
transmitter -for -wireless -operation. -See -
Figure 4
.
To -load -programs -from -the -
TBC
TM -
HH
-to -a -controller, -simply -press -
the -
-button. -The -two -devices -will -initiate -a -verification -procedure -
that -will -match -their -Programmer -I.D. -and -Controller -Number -
(verification -process -is -not -required -for -wired -I.R. -communication).
Figure 1
Figure 2
All manuals and user guides at all-guides.com
