Toro Super Recycler 21381 Скачать руководство пользователя | Manualshive

Страница: 22 / 28

background image

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service

Interval

Maintenance Procedure

After the first 5 hours

• Change the engine oil.

Before each use or daily

• Check the engine-oil level and add oil as needed.
• Ensure that the engine shuts off within 3 seconds after releasing the blade-control

bar.

• Clean grass clippings and dirt from under the machine.

Every 25 hours

• Lubricate the rear wheel gears.

Yearly

• Service the air filter.
• Change the engine oil.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
• Clean the engine by removing dirt and debris from its top and sides; clean it more

frequently in dusty operating conditions.

Yearly or before storage

• Empty the fuel tank before repairs as directed and before yearly storage.

Maintenance Safety

•

Disconnect the spark-plug wire from the spark plug
before performing any maintenance procedure.

•

Wear gloves and eye protection when servicing
the machine.

•

The blade is sharp; contacting the blade can result
in serious personal injury. Wear gloves when
servicing the blade. Do not repair or alter the
blade(s).

•

Never tamper with safety devices. Check their
proper operation regularly.

•

Tipping the machine may cause the fuel to leak.
Fuel is flammable and explosive, and can cause
personal injury. Run the engine dry or remove the
fuel with a hand pump; never siphon the fuel.

•

To ensure optimum performance of the machine,
use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
made by other manufacturers could be dangerous,
and such use could void the product warranty.

Preparing for Maintenance

1.

Shut off the engine and wait for all moving parts
to stop.

2.

Disconnect the spark-plug wire from the spark
plug (

).

g189355

Figure 24

1.

Spark-plug wire

3.

After performing the maintenance procedure(s),
connect the spark-plug wire to the spark plug.

Important:

Before tipping the machine to

change the oil or replace the blade, allow the
fuel tank to run dry through normal usage. If
you must tip the machine prior to running
out of fuel, use a hand fuel pump to remove
the fuel. Always tip the machine onto its
side, with the dipstick down.

22

«
...
20
21
22
23
24
...
»

Содержание Super Recycler 21381





























Отзывы:

Нет отзывов

Похожие инструкции для Super Recycler 21381

Бренд: Lawn-Boy Страницы: 24

Бренд: Lawn-Boy Страницы: 84

Бренд: Lawn-Boy Страницы: 20

Бренд: Toro Страницы: 48

Бренд: Troy-Bilt Страницы: 88

Бренд: Gardenline Страницы: 28

Бренд: Cub Cadet Страницы: 56

Бренд: Nakayama Страницы: 14

Бренд: Walker Страницы: 92

Бренд: MTD Страницы: 35

Бренд: VonHaus Страницы: 12

Wheel Horse XL 380H

Бренд: Toro Страницы: 40

Бренд: MTD Страницы: 18

Бренд: Yard Pro Страницы: 92

Бренд: Cub Cadet Страницы: 9

Бренд: Flymo Страницы: 12

Бренд: sunjoe Страницы: 16

Бренд: Kraftixx Страницы: 246

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды