Toro Super Recycler 20036 Скачать руководство пользователя страница 20

Страница: 20 / 24

Accessories

You may purchase the following accessories from an
Authorized Service Dealer:

•

Dethatcher kit

•

Side discharge kit

•

Spark arrestor

Troubleshooting

Toro designed and built your lawn mower for trouble-free operation. Check the following components and items carefully,
and refer to Maintenance on page 13 for more information. If a problem continues, contact an Authorized Service Dealer.

Problem

Possible Causes

Corrective Action

Engine does not start

1. The fuel tank is empty or the

fuel system contains stale fuel.

2. The primer has not been

pushed in.

3. The wire is not connected to

the spark plug.

4. The spark plug is pitted, fouled,

or the gap is incorrect.

1. Drain and/or fill the fuel tank

with fresh gasoline. If the
problem persists, contact an
Authorized Service Dealer.

2. Push the primer in 3 times.

3. Connect the wire to the spark

plug.

4. Check the spark plug and

adjust the gap if necessary.
Replace the spark plug if it is
pitted, fouled, or cracked.

Engine starts hard or loses power

1. The fuel tank contains stale

fuel.

2. The fuel cap vent hole is

plugged.

3. The air filter element is dirty

and is restricting the air flow.

4. The underside of the housing

contains clippings and debris.

5. The spark plug is pitted, fouled,

or the gap is incorrect.

6. The engine oil level is low or

the oil is dirty.

1. Drain and fill the fuel tank with

fresh gasoline.

2. Clean the fuel cap vent hole or

replace the fuel cap.

3. Clean the air filter pre-cleaner

and/or replace the paper air
filter.

4. Clean under the housing.

5. Check the spark plug and

adjust the gap if necessary.
Replace the spark plug if it is
pitted, fouled, or cracked.

6. Check the engine oil. Change

the oil if it is dirty or add oil if it
is low.

Engine runs rough

1. The wire is not connected to

the spark plug.

2. The spark plug is pitted, fouled,

or the gap is incorrect.

3. The air filter element is dirty

and is restricting the air flow.

1. Connect the wire to the spark

plug.

2. Check the spark plug and

adjust the gap if necessary.
Replace the spark plug if it is
pitted, fouled, or cracked.

3. Clean the air filter pre-cleaner

and/or replace the paper air
filter.

Содержание Super Recycler 20036

























Результаты поиска

Содержание Super Recycler 20036

Отзывы:

Похожие инструкции для Super Recycler 20036

Бренды по названию

Популярные бренды

Toro Super Recycler 20036, Руководство оператора

Результаты поиска

Содержание Super Recycler 20036

Отзывы:

Похожие инструкции для Super Recycler 20036

Бренды по названию

Популярные бренды