Toro STX-26, Руководство оператора

Страница: 13 / 48

Grinder Control/Hydraulic-Lift
Lever
Operate the grinder using the grinder control lever
as follows:
•
To start the grinder ( Figure 11 ), squeeze the
trigger and then press the red button on the top of
the lever. Once the grinder has started, you can
release the red button.
•
To stop the grinder ( Figure 11 ), release the trigger
for more than a half second.
Note:
If you are operating the grinder and
momentarily release the trigger (i.e., less than a
half second), the grinder continues to operate.
g013174
Figure 11
1. Neutral 3. Run the grinder
2. Start the grinder 4. Stop the grinder
•
To raise the grinder, pull the lever rearward ( Figure
12 ).
g013623
Figure 12
•
To lower the grinder, push the lever forward ( Figure
13 ).
g013624
Figure 13
•
To rotate the grinder to the right or left, move the
lever in the desired direction (
Figure 14 ).
13