Toro SnowMaster, Руководство пользователя

Страница: 22 / 42

Toro® - SnowMaster® Service Manual
3-8 Table of Contents
CHASSIS
Rotor Removal & Replacement
(Figure 22)
Removal
1. Remove the belt cover and remove belt and
rotor pulley as outlined in “Belt Removal &
Replacement.”
2. Remove the three bolts from behind the rotor pulley.
3. On the opposite side, remove the three bolts on the
bearing cap.
4. Remove the bearing bolt. Remove the bearing and
bearing retainer, rubber washer, and thrust washer.
5. Slide the rotor one way and remove.
Replacement
1. Make sure the thrust washer, bearing, and bearing
retainer are on the rotor shaft on the drive belt side.
Insert into the rotor hole. Insert the rotor through the
other side of the rotor hole.
2. Insert the thrust washer, bearing retainer and
bearing. Install the bolt. Torque bolt to 30 ft-lbs. (40
Nm).
Figure 23
Figure 24
Figure 25
Figure 26