Toro Sitework 22438, Руководство оператора

Страница: 7 / 12

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Before each use or daily
• Grease the bearings.
Every 100 hours
• Check the hydraulic hoses.
Before storage
• Grease the bearings.
• Check the hydraulic hoses.
• Paint chipped surfaces.
Every 2 years
• Replace the hydraulic hoses (or every 1500 hours, which ever comes first).
CAUTION
If you leave the key in the traction unit ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Greasing the Bearings
Service Interval: Before each use or daily
Before storage
1. Disconnect the attachment from the traction unit; refer
to the traction unit
Operator’s Manual .
2. Remove the 2 bolts securing the cover and remove it
(
Figure 4 ).
Figure 4
1. Cover 2. Grease fitting
3. Clean the grease fittings ( Figure 4 and Figure 5 ) with a
rag. Make sure that you scrape any paint off the front
of the fitting(s).
Figure 5
1. Grease fitting
4. Connect a grease gun to each fitting ( Figure 4 and
Figure 5 ).
5. Pump grease into the fittings until grease begins to
ooze out of the bearings.
6. Wipe up any excess grease.
Checking the Hydraulic Hoses
Service Interval: Every 100 hours
Before storage
Every 2 years—Replace the hydraulic hoses (or every
1500 hours, which ever comes first).
1. Check the hydraulic hoses for leaks, loose fittings,
kinked lines, loose mounting supports, wear, weather,
and chemical deterioration.
2. Make necessary repairs before operating the machine.
7