Toro Sand Pro 2040Z, Руководство оператора

Страница: 22 / 60

G023445
-20 0 20 40 60 80 100 F
-30 -20 -10 0 10 20 30 40 C
o
o
S AE 30
S AE 5W-20
S AE 10W-30 / S AE 10W-40
S AE 40
Figure 14
1. Position the machine on a level surface.
2. Stop the engine and remove the key.
3. Remove the dipstick ( Figure 15 ) and wipe it with a
clean cloth ( Figure 16 ).
1
G023517
Figure 15
1. Dipstick
G008792
1
2
5
6
7
3
9
10
4
8
Figure 16
4. Insert the dipstick into the fill tube without threading
it into the port.
5. Remove the dipstick from the tube and check the oil
level. If the oil level is low, slowly pour only enough oil
into the fill tube to raise the oil level to the upper-limit
mark on the dipstick
Important:
Keep the engine oil level between the
upper and lower limits on the dipstick. Engine
failure may occur as a result of running the engine
with too much or too little engine oil.
6. Install the dipstick firmly in place.
Important:
The dipstick must be fully seated in
the tube to provide proper sealing of the engine
crankcase. Failure to seal the crankcase may result
in engine damage.
22