Toro RP-1200, Руководство оператора

Страница: 11 / 20

Starting and Stopping the
Engine
Starting the Engine
1. Move the fuel valve to the On position (Figure 10).
g019704
1
Figure 10
1. Fuel valve
2. Move the engine switch to the On position (Figure 11).
Figure 11
1. Engine switch
3. Move the choke lever to the left if you are starting a
cold engine (Figure 12).
Note:
A warm or hot engine may not require choking.
g019774
1
Figure 12
1. Choke
4. Slowly pull the recoil handle until you encounter
resistance, then pull sharply to start the engine.
5. After the engine starts, gradually move the choke to the
right. If the engine stalls or hesitates, move the choke
left again until the engine warms up.
11